VC type(screw & plunger) for small products
- ▶ATOM-V-20 FEATURES
- This screw type small insert machine-carries on quick and simple molding and complicated job by screw it can mold precise and better looking products than plunger type.
- ▶ATOM-V-10P FEATURES
- This is only minimum parts injection machine producing quick and simple molding by use of mold itself without mold base. (1 cycle within 5sec)
- ▶ATOM-VC-10P,15P FEATURES
- This is only insert machine applied C type frame without tie-bar. Which offer wideworking space and efficient working circumstance proper for molding parts mold like electric code zipper wire.
SPECIFICAION
| ATOM-V-20 | ATOM-V-10P | ATOM-VC-10P | ATOM-VC-15P | |||
| I n j e c t i o n |
Plunger Diameter |
mm | 22 | 22 | 22 | 26 |
| Injection Pressure |
kg/ ㎠ |
1048 | 1148 | 1148 | 1148 | |
| Injection Capacity |
㎤ | 38 | 47 | 47 | 68 | |
| Screw Revolution |
rpm | 200 | - | 200 | 200 | |
| C l a m p i n g p a r t s |
Clamping Force | ton | 20 | 10 | 10 | 10 |
| Clamping stroke | mm | 125 | 90 | 140 | 180 | |
| Min. Mold Thickness |
mm | 20 | 20 | 20 | 20 | |
| Turn table size |
mm | 265 | 265 | - | - | |
| Mold Platen size | mm | 460 x 360 | 460 x 360 | 360 x 300 | 460 x 360 | |
| Ejector Stroke | mm | - | - | - | - | |
| G e n e r a l s |
Motor Capacity |
kw | 2.2 | 2.2 | 2.2 | 2.2 |
| Capacity of Heaterd | kw | 1.2 | 1.2 | 1.2 | 2 | |
| Machine Size(WxLxH) | m | 460x800x2077 | 460x800x1800 | 1140x600x1760 | 1140x600x1960 |
- Figures shown herein are subject to change without notice. Screw diameter and clamping force can be designed according to customer's needs.
